How we keep you safe

You've seen the news about solar fires. Here's how we keep it from happening to your home.

Solar itself isn't the danger. Most fires start with cheap parts and rushed, unlicensed installation. That's exactly where we refuse to cut corners.

An open protection and breaker box next to a hybrid inverter and wall battery, with neatly routed and labelled cables
Inside the protection box on one of our installs
A hybrid inverter, protection box and wall-mounted battery installed neatly on a wall
Inverter, protection box and battery, ready for handover

Look inside a safe installation

Tap a number to see what we check at each point.

  1. 1Solar panels

    Quality, correctly rated panels from known manufacturers, mounted so air can flow underneath and keep them cooler in Philippine heat.

  2. 2Roof check & mounting

    We survey your roof with a drone and check its condition first. Rails and clamps are fixed to the structure and sealed against leaks.

  3. 3DC cables & connectors

    Correctly sized solar cable, matched connectors that are sealed and torqued, and neat routing in conduit. Loose or mismatched connectors are a common cause of solar fires.

  4. 4Protection box (DC side)

    Surge protection devices, fuses and a DC isolator between the panels and the inverter, so faults are cut off before they become dangerous.

  5. 5Hybrid inverter

    Converts solar power for your home and manages the battery. Installed with proper ventilation and clearance.

  6. 6Battery

    Keeps chosen circuits on during brownouts. Installed on a stable, ventilated spot away from heat sources, with its own protection.

  7. 7AC breakers & panel

    Correctly rated breakers and AC surge protection where solar joins your home wiring.

  8. 8Grounding

    The whole system is properly grounded, then insulation and voltage are tested and documented before switch-on.

The Kippoks Safety Tag

Every system we install is checked against the same list, and we'll walk you through it at handover.

We never promise "zero risk". We tell you exactly how we prevent problems, and we put licensed people in charge of doing it.

Kippoks Safety Tag

Every installation is checked against this list.

  • Designed and signed off by PRC-licensed electrical professionals (REE / RME / PEE)
  • Installed by TESDA-certified installers, trained by registered trainers
  • Proper protection devices on every circuit
  • Quality, correctly rated parts, no cheap cables or connectors
  • Roof checked first, surveyed with a drone
  • Tested before handover · 1-year workmanship warranty
  • Free fire extinguisher, placed near the inverter and battery
See Technical Details
  • DC and AC surge protection devices, correctly rated breakers and fuses
  • Proper grounding and cable sizing for Philippine heat
  • Matched connectors, sealed and torqued
  • Documented insulation and voltage tests before switch-on

Brands we install:

Panels
  • Trina
  • Jinko
  • JA Solar
  • LONGi
  • Canadian Solar
  • OSDA
Inverters
  • Solis
  • Deye
  • Growatt
  • Sungrow
Batteries
  • Pylontech
  • BYD
  • Deye
  • Dyness
  • LvTopSun
  • Ginza
  • AlpSolar

Licensed people, not just a crew

  • PRC-licensed team REE / RME / PEE electrical professionals and TESDA-certified installers. SEC and DTI registered.
  • Trusted brands Tier-1 panels, inverters and batteries from the names below
  • Power during brownouts Hybrid systems with battery keep your chosen circuits on
Panels
  • Trina
  • Jinko
  • JA Solar
  • LONGi
  • Canadian Solar
  • OSDA
Inverters
  • Solis
  • Deye
  • Growatt
  • Sungrow
Batteries
  • Pylontech
  • BYD
  • Deye
  • Dyness
  • LvTopSun
  • Ginza
  • AlpSolar
  • 10+ satisfied customers so far
  • 1-year workmanship warranty, plus panels 15 yrs, battery 10 yrs, inverter 5 yrs (manufacturer)
  • Free quotation + drone roof survey
  • Free fire extinguisher with every installation
Talk to us, no pressure.